History of computing hardware (1960s–present)
The history of computing hardware starting at 1960 is marked by the conversion from vacuum tube to solid state devices such as the transistor and later the integrated circuit. By 1959 discrete transistors were considered sufficiently reliable and economical that they made further vacuum tube computers uncompetitive. Computer main memory slowly moved away from magnetic core memory devices to solid-state static and dynamic semiconductor memory, which greatly reduced the cost, size and power consumption of computer devices. Eventually the cost of integrated circuit devices became low enough that home computers and personal computers became widespread.
Third generation
The mass increase in the use of computers accelerated with 'Third Generation' computers. These generally relied on Jack St. Clair Kilby's invention of the integrated circuit (or microchip), starting around 1965. However, the IBM System/360 used hybrid circuits, which were solid-state devices interconnected on a substrate with discrete wires.
The first integrated circuit was produced in September 1958 but computers using them didn't begin to appear until 1963. Some of their early uses were in embedded systems, notably used by NASA for the Apollo Guidance Computer and by the military in the LGM-30 Minuteman intercontinental ballistic missile.
By 1971, the Illiac IV supercomputer, which was the fastest computer in the world for several years, used about a quarter-million small-scale ECL logic gate integrated circuits to make up sixty-four parallel data processors.[1]
While large 'mainframes' such as the System/360 increased storage and processing capabilities, the integrated circuit also allowed the development of much smaller computers. The minicomputer was a significant innovation in the 1960s and 1970s. It brought computing power to more people, not only through more convenient physical size but also through broadening the computer vendor field. Digital Equipment Corporation became the number two computer company behind IBM with their popular PDP and VAX computer systems. Smaller, affordable hardware also brought about the development of important new operating systems like Unix.
Large scale integration of circuits led to the development of very small processing units, an early example of this is the processor was the classified CADC used for analyzing flight data in the US Navy's F14A Tomcat fighter jet. This processor was developed by Steve Geller, Ray Holt and a team from AiResearch and American Microsystems.
In 1966, Hewlett-Packard entered the general purpose computer business with its HP-2116, offering a computational power formerly found only in much larger computers. It supported a wide variety of languages, among them BASIC, ALGOL, and FORTRAN.
1969 Data General Nova.
In 1969, Data General shipped a total of 50,000 Novas at $8000 each. The Nova was one of the first 16-bit minicomputers and led the way toward word lengths that were multiples of the 8-bit byte. It was first to employ medium-scale integration (MSI) circuits from Fairchild Semiconductor, with subsequent models using large-scale integrated (LSI) circuits. Also notable was that the entire central processor was contained on one 15-inch printed circuit board.
In 1973, the TV Typewriter, designed by Don Lancaster, provided electronics hobbyists with a display of alphanumeric information on an ordinary television set. It used $120 worth of electronics components, as outlined in the September 1973 issue of Radio Electronics magazine. The original design included two memory boards and could generate and store 512 characters as 16 lines of 32 characters. A 90-minute cassette tape provided supplementary storage for about 100 pages of text. His design used minimalistic hardware to generate the timing of the various signals needed to create the TV signal. Clive Sinclair later used the same approach in his legendary Sinclair ZX80.
Fourth generation
The basis of the fourth generation was Marcian Hoff's invention of the microprocessor.
Unlike Third generation minicomputers, which were essentially scaled down versions of mainframe computers, the fourth generation's origins are fundamentally different. Microprocessor-based computers were originally very limited in their computational ability and speed, and were in no way an attempt to downsize the minicomputer. They were addressing an entirely different market.
Although processing power and storage capacities have increased beyond all recognition since the 1970s, the underlying technology of LSI (large scale integration) or VLSI (very large scale integration) microchips has remained basically the same, so it is widely regarded that most of today's computers still belong to the fourth generation.
On November 15, 1971, Intel released the world's first commercial microprocessor, the 4004. It was developed for a Japanese calculator company, Busicom, as an alternative to hardwired circuitry, but computers were developed around it, with much of their processing abilities provided by a single small microprocessor chip. Coupled with one of Intel's other products - the RAM chip, based on an invention by Robert Dennard of IBM, (kilobits of memory on a single chip) - the microprocessor allowed fourth generation computers to be smaller and faster than previous computers. The 4004 was only capable of 60,000 instructions per second, but its successors, the Intel 8008, 8080 (used in many computers using the CP/M operating system), and the 8086/8088 family (the IBM PC and compatibles use processors still backwards-compatible with the 8086) brought ever-increasing speed and power to the computers. Other manufacturers also produced microprocessors which were widely used in microcomputers.
Supercomputers
1976: Cray-1 supercomputer.
At the other end of the computing spectrum from the microcomputers, the powerful supercomputers of the era also used integrated circuit technology. In 1976 the Cray-1 was developed by Seymour Cray, who had left Control Data in 1972 to form his own company. This machine, the first supercomputer to make vector processing practical, had a characteristic horseshoe shape, to speed processing by shortening circuit paths. Vector processing, which uses a single instruction to perform the same operation on many arguments, has been a fundamental supercomputer processing method ever since. The Cray-1 could calculate 150 million floating point operations per second (150 megaflops). 85 were shipped at a price of $5 million each. The Cray-1 had a CPU that was mostly constructed of ECL SSI/MSI circuits.
[edit] Mainframes and minicomputers
Time shared computer terminals connected to central computers, such as the TeleVideo ASCII character mode smart terminal pictured here, were sometimes used before the advent of the PC.
Before the introduction of the microprocessor in the early 1970s, computers were generally large, costly systems owned by large institutions: corporations, universities, government agencies, and the like. Users—who were experienced specialists—did not usually interact with the machine itself, but instead prepared tasks for the computer on off-line equipment, such as card punches. A number of assignments for the computer would be gathered up and processed in batch mode. After the jobs had completed, users could collect the output printouts and punched cards. In some organizations it could take hours or days between submitting a job to the computing center and receiving the output.
A more interactive form of computer use developed commercially by the middle 1960s. In a time-sharing system, multiple teletype terminals let many people share the use of one mainframe computer processor. This was common in business applications and in science and engineering.
A different model of computer use was foreshadowed by the way in which early, pre-commercial, experimental computers were used, where one user had exclusive use of a processor.[2] Some of the first computers that might be called "personal" were early minicomputers such as the LINC and PDP-8, and later on VAX and larger minicomputers from Digital Equipment Corporation (DEC), Data General, Prime Computer, and others. They originated as peripheral processors for mainframe computers, taking on some routine tasks and freeing the processor for computation. By today's standards they were physically large (about the size of a refrigerator) and costly (typically tens of thousands of US dollars), and thus were rarely purchased by individuals. However, they were much smaller, less expensive, and generally simpler to operate than the mainframe computers of the time, and thus affordable by individual laboratories and research projects. Minicomputers largely freed these organizations from the batch processing and bureaucracy of a commercial or university computing center.
In addition, minicomputers were more interactive than mainframes, and soon had their own operating systems. The minicomputer Xerox Alto (1973) was a landmark step in the development of personal computers, because of its graphical user interface, bit-mapped high resolution screen, large internal and external memory storage, mouse, and special software.[3]
Microprocessor and cost reduction
The Apple II, one of the "1977 Trinity". The drive shown is a model designed for the Apple III.
The minicomputer ancestors of the modern personal computer used integrated circuit (microchip) technology, which reduced size and cost, but processing was carried out by circuits with large numbers of components arranged on multiple large printed circuit boards before the introduction of the microprocessor. They were consequently physically large and expensive to manufacture. After the "computer-on-a-chip" was commercialized, the cost to manufacture a computer system dropped dramatically. The arithmetic, logic, and control functions that previously occupied several costly circuit boards were now available in one integrated circuit which was very expensive to design but very cheap to manufacture in large quantities. Concurrently, advances in the development of solid state memory eliminated the bulky, costly, and power-hungry magnetic core memory used in prior generations of computers.
There were a few researchers at places such as SRI and Xerox PARC who were working on computers that a single person could use and could be connected by fast, versatile networks: not home computers, but personal ones.
